Num'axes PIE1028 Gebrauchsanleitung Seite 38

TIME LAPSE
(5 sec. to 24 hr.)
DELAY
(PIR INTERVAL)
(5 sec. to 24 hr.)
PIE1028 – indice A – avril 2018
to work only at a certain time of the day. The rest
of the time, the camera will not work.
Example: If start time is 15:00:00 and end time is
18:00:00, each day, the camera will work only
between 15h00 (03:00 PM) and 18h00 (06:00
PM).
Press the RIGHT button to enter.
1. OFF (default setting)
2. ON
Press the LEFT button to select ON then the
RIGHT button to set the interval between the
automatic shooting of photos/videos.
00:00:00 (HH:MM:SS)
Press the LEFT button to choose the desired digit
then the RIGHT button to confirm and move to
the next digit.
Once the interval is programmed, press the
RIGHT button again to exit.
_______________________________
The camera
automatically at the programmed time interval.
Example: if programmed interval is 00:30:00, the
camera will automatically capture photo/video
every 30 minutes.
Note: please don't turn "ON" TIME LAPSE and
DELAY simultaneously.
Press the RIGHT button to enter.
1. OFF (default setting)
2. ON
will take photos or videos
38/120