Num'axes PIE1028 Gebrauchsanleitung Seite 37

TIMER
(working range)
PIE1028 – indice A – avril 2018
LENGTH (5 to 60 seconds)
Press the RIGHT button to enter.
Default setting: 5 seconds
Press the LEFT button to choose the desired
length for the video then the RIGHT button to
save the setting and exit.
FRAME (video frame speed)
Press the RIGHT button to enter
1. 30FPS (default setting)
2. 15FPS
FPS = Frames Per Second
Press the LEFT button to navigate then the RIGHT
button to save the setting and exit.
Press the RIGHT button to enter.
1. OFF (default setting)
2. ON
Press the LEFT button to select ON then the
RIGHT button to set the working range.
Star: 00:00:00 (HH:MM:SS)
End: 00:00:00 (HH:MM:SS)
Press the LEFT button to choose the desired digit
then the RIGHT button to confirm and move to
the next digit.
Once the start and end time are programmed,
press the RIGHT button again to exit.
_______________________________
When "Timer" is set to ON, the camera can be set
37/120