System Time - Num'axes PIE1028 Gebrauchsanleitung

BEEP
(camera sounds)
SENSITIVITY
(PIR sensitivity)

SYSTEM TIME

(Date & Time)
PIE1028 – indice A – avril 2018
Press the RIGHT button to enter.
1. ON (default setting)
2. OFF
Press the LEFT button to navigate then the RIGHT
button to save the setting and exit.
_______________________________
You can choose to hear a beep sound (ON) or not
(OFF) when you press a key.
Press the RIGHT button to enter.
1. High (default setting)
2. Middle
3. Low
Press the LEFT button to navigate then the RIGHT
button to save the setting and exit.
_______________________________
High sensitivity 1) is more sensitive to movements
by smaller subjects; 2) offers longer detection
distance; 3) makes it easier for sensor to detect
difference between body heat and outdoor
temperature; 4) makes it easier to trigger camera
to record.
In high temperature environment, body heat of
subjects and environment temperature are hard
to tell by camera, the suggested setting is high.
It is recommended to use low sensitivity for
environments with lots of interference like hot
wind, smoke, near window, etc.
Press the RIGHT button to enter.
MM.DD.YYYY
04.22.2018 00:00
HH:MM
40/120