Inserting/Replacing The Battery; Adjusting The Cutting Height - Miogarden ARM3740Li Originalbetriebsanleitung

ARM3740Li
Adusting the handle height
To adapt to the height of the user the
handlebar can be adjusted to three different
positions.
 Loosen the quick-clamping lever (1.).
 Move the handle to the desired
height (2.).
 Flip the quick-clamping lever.

Adjusting the cutting height

The cutting heigt can be varied in 5 steps
from 25 mm (1) to 75 mm (5) with the cutting
height adjustment.
 Pull the handle outwards slightly.
 Set the required cutting height..
 Release the lever again.

Inserting/replacing the battery

 Charging the battery as described in the
user manual of the charger.
 Open the battery cover (1.)
 Press the charged battery into the power
tool until it clicks into place (2.).
 Close the battery cover (3.)
 To remove, press the release button (1.)
and pull out the battery (2.).
CAUTION!
Protect the battery contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts –
Explosion and fire hazard!
27