Attaching The Grass Catcher - Miogarden ARM3740Li Originalbetriebsanleitung

 Place the upper handle on the lower
handle (3.).
 Attach the upper handle (4.).
Insert the threaded bolt of quick-
clamping lever (A) through the holes in
the upper handle (B) and the lower
handle (D) .
Pull the handles slightly apart and place
the spring (C) between the handles on
the threaded bold.
Screw the nut (E) a few turns onto the
threaded bolt..
 Flip the quick-clamping levers (5.).
NOTE
Is it not possible to completety flip the quick-
clamping lever, loosen the nut slightly.
 Attach the cable with the two cable
clamps (6.).
26
Assembling the grass catcher
 Insert the two lower parts together until it
clicks (1.).
 Turn in the two srews at the bottom (2.).
 Put on the upper part and press it
together until it clicks (3.).

Attaching the grass catcher

 Lift the discharge flap (1.).
 Hook the grass catcher bag into the lawn-
mower (2.).
 Fold the discharge flap down again (3.).
ARM3740Li