Lovibond MD110 Bedienungsanleitung Seite 87

Methods
GB
Notes:
1. Strong alkaline or acidic water samples must be adjusted between pH 3 and pH 5 before
the reagent is added (use 0.5 mol/l Sulfuric acid resp. 1 mol/l Sodium hydroxide).
2. Before using clean the vials with Hydrochloric acid (approx. 20%). Rinse thoroughly with
deionised water.
3. Conversion:
mg/l MoO = mg/l Mo x 1.67
4
mg/l Na MoO = mg/l Mo x 2.15
2 6
Reagent / Accessories
Set
VARIO Molybdenum 1 LR F20
VARIO Molybdenum 2 LR
Mixing Cylinder
MD110_1 12/2016
Form of reagent/Quantity
Powder Pack / 100
Liquid reagent / 50 ml
25 ml
Order-No.
535450
19802650
87