Confidential Nature Of The Information; How To Request Assistance; How To Order Spare Parts; Choice And Qualification Of The Personnel - Nilfisk cfm CV 10 Betriebsanleitung

CV 10, CV 15, CV 15W-AV, CV 18, CV 30, CV 30W

Confidential nature of the information

The technical information in this manual is the property
of the manufacturer and shall be considered of a
confidential nature. It is therefore forbidden to even
partially duplicate or disclose such information without
having received prior written authorization from the
manufacturer.
It is also forbidden to use this manual for purposes
other than machine installation, use and maintenance.
All violations will be prosecuted.

How to request assistance

Contact the Manufacturer's Technical Service in the
case of operational faults and breakdowns where
the intervention of the "Manufacturer's Technician" is
required.

How to order spare parts

Requests for spare parts can be sent to the
Manufacturer or to the authorized Service Centre.
Choice and qualification of the
personnel
The employer shall inform the personnel about risks
of accidents, the devices and garments required for
the safety of the operator, risks from excessive noise
levels and about the general provisions established by
the European Directives and legislation of the country
where the machine is installed.
List of qualifications of the machine
operators and technicians
Machine operator
Accomplishment of operations required in order to run
the machine.
- Operation of the machine controls;
GB
- Accomplishment of simple operations relating
to machine operation (eg.: emptying out the
vacuumed material);
- Accomplishment of cleaning operations and daily
inspections.
WARNING!
The machine operator must only work with the
protective casings mounted and the safety devices
enabled.
C311
Mechanical servicing technician
Works in all operating conditions and at all protection
levels.
Carries out all mechanical repairs or adjustments, but
does not work on powered electrical systems.
Servicing electrician
Works in all operating conditions and at all protection
levels.
Carries out all repairs and adjustments to the electrical
system, even when this is powered.
Note
The tasks carried out by the relative personnel are not
rigidly defined since the operator may possess know-
how enabling him to carry out more than one job.
Manufacturer's technician:
carries out installation, setting up and modification
work in accordance with the manufacturer.
May also train other persons.

Machine data

Identification data

Always state the identification data of the machine in
your possession whenever you contact the "Technical
Service".
An exact indication of the "Machine model" and "Serial
number" will prevent or incorrect information from
being given.
We suggest you write the data of your machine in the
following table:
Machine model .........................................................
Serial number ...........................................................
Year of manufacture .................................................
Category ...................................................................
Voltage ......................................................................
4
09/2014