Introduction; Warranty - Nilfisk cfm CV 10 Betriebsanleitung

CV 10, CV 15, CV 15W-AV, CV 18, CV 30, CV 30W
Dear Customer,
thank you for having chosen one of our products. We are certain that use of this vacuum will give you complete
satisfaction.
It is a highly technical machine that has been manufactured with care in order to be longlasting and fully efficient.
The vacuum has been built in compliance with machine Directive 89/392/EEC and the CE symbol is affixed to the
machine itself.
WARNING!
This symbol is used to call your attention to dangerous operations or machine parts that could cause
personal injuries or even the death of the operator. Irreparable damage to the machine is also possible
where this symbol is used.
Note
Indicates important procedures or instructions.
WARNING!
For explanatory purposes, some of the illustrations in this manual depict the machine or machine parts
with their panels or casings removed.
Never ever use the machine without these protections.

Introduction

The operational safety of the machine in your
possession is entrusted to those who work with it each
day.
These persons must therefore have detailed
information about how to correctly use, operate,
service and repair the vacuum.
This manual has been compiled in order to inform
machine users about the precautions and basic
regulations able to ensure their safety and allow the
vacuum to remain in good working condition for the
longest possible time.
Personnel authorized to work with the machine must
read this manual before the machine is started.
Keep the manual near the machine, in a protected and
dry place away from direct sunlight and ready to hand
for future consultation when required.
GB
Ask for another copy from your Dealer or the
Manufacturer if this manual is lost or deteriorates.
Inform the Manufacturer about the name and address
of the new owner if the machine is sold to third parties.
This manual reflects the state-of-the-art at the moment
the machine was sold and cannot be considered
inadequate if modifications are subsequently made in
compliance with further experience.
The Manufacturer therefore reserves the right to
update the production range and relative manuals
without being obliged to update previous machines
and manuals unless in exceptional cases.
Consult your nearest After-Sales Service Centre or the
Manufacturer in case of doubt.
Note that the Manufacturer continually strives to
optimize the product.
C311
For this reason, the Manufacturer is always more than
happy to receive all indications or proposals to enable
improvements to either the machine or the manual.

Warranty

The machine was delivered to the user according to
the conditions that were valid at the time of purchase.
For no reason what so ever shall the user be
authorized to tamper with the machine. Contact your
nearest After-Sales Service Centre in the event of
faults.
All attempts by the user or by unauthorized personnel
to modify or, more generally, tamper with any part of
the vacuum shall void the warranty and relieve the
Manufacturer of all responsibility for damage to either
persons or property caused by such action.
The Manufacturer shall also be relieved of liability in
the following cases:
- incorrect installation;
- improper use of the machine by inadequately
trained personnel;
- utilization contrary to the provisions in force in the
country of use;
- incorrect or insufficient maintenance;
- use of non genuine spares or use of spares
that are not specifically made for the model in
question;
- total or partial failure to comply with the
instructions;
- failure to forward the certificate of guarantee.
2
09/2014