Rexel Auto+ 100 Bedienungsanleitung Seite 5

Lights and Icons Explained
Colour of symbol
Power on/off switch
Auto Mode
Continuous Jam Boost Mode
Reverse Mode
Paper Jam
Loading Door open
Bin full or open
Motor Cool Down Required
Self cleaning of cutters
Sleep Mode
Auto+ 100 Shredding Capability
Auto+ 100 CAN shred
the following:
Stapled paper
25mm within the corner
26/6 and 24/6 or smaller staples
A5 paper loaded inline with
guidelines
100 sheets colour printing
Auto+ 100 CANNOT
shred the following:
Heavy Duty Staples. Check the
staple leg length is not greater
than 6mm.
Large clips. Check the length
of the paperclip is not longer
than 32mm.
Plastic sheets, laminated
documents, plastic folders, glossy
paper or a sheet covered with print
on both sides.
Auto Paper Jams Bin full /
bin open /
loading door open
Blue Red Red
Off
Light
Light
Light Light
Light Light
Light Light
Light Light
Light
Light Flashing
Off
Paper clip paper
25mm within the corner
Capable of shredding small/
medium (max wire thickness =
0.9 mm) paper clips
100 sheets plain paper
>80/100gsm paper (through low
sheet count entry slot)
A document with more than
25 sheets held together by a
staple or clip.
Multiple folded sheets (folded
A3 sheets likely to be more
common).
Thick paper or card
Cool down
Red
Flashing
Although the Auto+
100 will accept
fastened sheets, Rexel
recommend that
staples and paper clips
are removed prior to
A3 folded in half
max. 2 sheets shredding to extend the
life of the product.
100 sheets single sided printed
paper
80 gsm paper
- A4 - 210mm x 297mm
- A5 - 148mm x 210mm
- A3 single sheet folded in half
to make A4
Bound documents Bulldog clips
Magazines or other documents Unopened mail e.g. junk mail
bound by multiple staples
or clips
Adhesive labels
G
5