Herunterladen Inhalt Inhalt Diese Seite drucken

Electrolux EDB17 Series Gebrauchsanweisung Seite 9

Inhaltsverzeichnis

Werbung

TROUBLESHOOTING
PROBLEM
The soleplate is not heating
even though the iron is turned
on.
The iron does not produce
steam.
The spray function does not
work.
The steam jet and vertical
steam jet functions does not
work.
Brown streaks come out of the
soleplate while ironing and
stain the linen.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an Electrolux service center
that can remove and recycle the battery and electric parts in a safe and professional way. Follow your
country's rules for the separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information and specifications without notice.
www.electrolux.com
POSSIBLE CAUSE
Connection problem.
The temperature selector is in "MIN"
position.
Not enough water in tank.
Steam selector is set in non-steam
position.
The selected temperature is lower
than that specified to use with steam.
Not enough water in tank.
The steam jet function was used very
frequently within a short period.
The iron is not hot enough.
You have used hard water, which has
caused scale flakes to develop in the
water tank.
You have used chemical descaling
agents.
Fabric fibres have accumulated in
the holes of the soleplate and are
burning.
The fabrics might not be properly
rinsed or the garments are new and
have not been washed before ironing.
SOLUTION
Check the main power supply cable, plug,
and outlet.
Select adequate temperature.
Fill the water tank (see "Getting started",
no 2).
Set the steam selector between positions
of minimum steam and maximum steam
(see "Ironing chart").
Increase the temperature to at least
Fill the water tank (see "Getting started",
no 2).
Put the iron in a horizontal position and
wait before using the steam jet function.
Adjust the proper temperature to steam
ironing (up to
). Put the iron in vertical
position and wait until the temperature
indicator light turns off.
Use the self-clean function one or more
times.
Do not use any descaling agents.
Use the self-clean function one or more
times. Clean the soleplate with a damp
soft cloth.
Please rinse the laundry properly again.
GB
FR
AR
BG
CZ
DE
DK
.
EE
ES
FA
FI
GR
HR
HU
IT
LT
LV
NO
PL
RO
RS
RU
SE
SI
SK
TR
UA
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis