Charging The Battery - Beurer AS 87 Gebrauchsanweisung

5. Charging the battery

When the battery level indicator on the activity sensor shows an
empty battery, you need to charge the battery. To charge the
battery, proceed as follows:
1. Turn on your computer and insert the USB plug of your
USB charging cable into the USB socket.
2. Connect the magnetic fastening of the USB charging
cable to your activity sensor as shown. Ensure that the
charging cable is positioned correctly. Only then will the
battery be charged.
3. The current charge status is shown by the battery status
indicator. It usually takes approx. 3 hours to fully charge the battery. Once the
device's battery is fully charged, the word
WARNING
Do NOT charge the activity sensor if the two charger contacts on the rear of the
device are wet. If necessary, carefully dab the two charger contacts dry with a cloth.
If a battery leaks, put on protective gloves and dispose of the device.
FULL
appears on the display.
38