Functions Of The Ir Remote Control; Preprogrammed Colourchange Sequences - Proled Cc Bedienungsanleitung

PROLED CONTROLLER RGB DMX PROLED

Functions of the IR Remote control

DMX: By pressing this button the controller will stop the running stand alone
programm and revert back to DMX control.
P1-P5: by pressing these buttons one of the five preprogrammed colourchange
sequencies can be started.
P1: Manual colourchange red, orange, yellow, green, cyan, blue, purple, white
P2: Colourchange sequence R->RG->G->GB->B->RG->R
P3: Colourchange sequence R->RGB->B->RB->RGB->RG->G->RGB->RB->R
P4: Colourchange sequence B->R->G->B
P5: Colourchange sequence Black->R->Black->G->Black->B->Black
Lock: By pressing this button the stand alone program is stopped.
Fade: By pressing this button Flash or Fade Mode can be selected for the colourchange sequences
(only P2-P5).
BRIGHTNESS: With the + und - buttons 16 different intensity levels can be selected.
SPEED: With the + und - buttons 16 different speeds can be selected for the stand alone program.
Preprogrammed Colourchage Sequences (P2-P5):
Flash Mode Fade Mode
P2
P3
P4
P5
www.proled.com 13 info@proled.com