PROLED CC Bedienungsanleitung Seite 10

PROLED
Contents
Introduction ............................................................................................................................. 10
Features ................................................................................................................................. 10
Connectors .............................................................................................................................. 10
Operation ................................................................................................................................. 11
Typical Wiring ....................................................................................................................... 12
Functions of the IR Remote Control ..................................................................................... 13
Preprogrammed Colourchange Sequences ......................................................................... 13
DMX Dipswitch Table ............................................................................................................. 14
Sepecifications ....................................................................................................................... 17
Introduction
We thank you for choosing the PROLED RGB DMX Controller. The PROLED Controller RGB DMX
decodes the commonly used DMX512/1990 control signal with sophisticated microcomputer technology
to an analogue signal. The device can control one to three output channels with 256 intensity levels
each. Lighting programs can be selected via remote control or DMX controller.
Features
•
Compatible with the DMX512/1990 standard
•
256 intensity levels, full colour mixing
•
3 RGB channels with 5A power rating each
•
256 greyscale
•
5 preprogrammed colourchange programs
•
Infrared remote control
•
Control of LED modules with 1 - 3 channels
•
Free choice of DMX address
•
Modularity allows a direct installation together with LED modules.
Connectors
1.) DMX input (RJ45)
2.) DMX output (RJ45)
3.) Dipswitch for setting the DMX start address
4.) IR sensor
5.) Output connector
6.) DC Input
info@proled.com
PROLED CONTROLLER RGB DMX
10 www.proled.com