Electrical Connection - Sentiotec HOME-F45 Montage- Und Gebrauchsanweisung

Installation instructions, only for experts

4.8. Electrical connection

1. Unscrew the screws 1 with a screwdriver.
Remove the cover plate 2.
Connection Home fin 4.5 kW, 6.0 kW, 7.5 kW and 9.0 kW
(HOME-F45 / HOME-F60 / HOME-F75 / HOME-F90)
1. Guide the connection cable through the feed-through 3.
2. Connect the wires of the connection cable (depending on the type) to the
terminals of the sauna heater and to the corresponding control device ter-
minals. Observe the installation instructions for the sauna control unit when
doing so.
3. Reattach the cover panel 1 to the heater.
1
p. 18/26
1
2
3