Konig SAS-IPCAM115 Anleitung Seite 7

Please enter a camera name and password for security and select
9
the tab:
The IP camera will automatically enter the viewing screen
(see "Figure 14").
Figure 11
Figure 13
Start up the IP camera after the Wi‑Fi connection has been completed
Power On
1
Plug the power adapter DC connector into the DC input port of the
IP camera and then plug the power adapter into a wall outlet. The
status LED on the IP camera will turn green for about 15 seconds.
Programme Loading
2
The status LED will flash red for about 15 seconds.
(see "Figure 13").
7
ENGLISH
Figure 12
Figure 14