SOLIS 7582 Bedienungsanleitung Seite 38

M o d e b u t t on
When you activate your fan, the appliance starts in Normal mode. You can choose
from 3 different settings:
Normal mode
Nature mode
Sleep mode
By each press of the button , the setting switches to the next position. The Sleep
mode setting is followed by the Normal mode setting.
a) Normal mode
In Normal mode, you can select the speed yourself using the button
choose between low , medium
b) Nature mode
In Nature mode, the fan switches between the high, medium and slow speed,
thus imitating a natural wind. The sequence and duration of the particular speed
is factory-set and also depends on the ventilation speed you have selected.
If you have selected the high speed
at high and medium speeds and less often at low speed.
If you have selected the medium speed
mainly at medium and low speeds and never at high speed.
If you have selected the low speed
at low speed, less often at medium speed and never at high speed.
Note: In Nature mode, the changing fan speed is not reported by different
statements in the display.
74
. You can
and high speed.
in Nature mode, the fan works mainly
in Nature mode, the fan works
in Nature mode, the fan works mainly
c) Sleep mode
In Sleep mode, too, you can choose between high, medium and low speeds. In
this function, the speed gradually decreases, based on the operation mode of
the fan in Nature mode.
If you have selected the high speed
like it does in the Nature mode with the high speed setting for the first 30 min-
utes. For the next 30 minutes, it works like it does in the Nature mode with the
medium speed setting and then in the Nature mode with the low speed setting
for the remaining time.
If you have selected the medium speed
works like it does in the Nature mode with the medium speed setting for the
first 30 minutes and then in the Nature mode with the low speed setting for the
remaining time.
If you have selected the low speed
it does in the Nature mode with the low speed setting for the entire time: mainly
at low speed and rarely at medium speed.
Note: In Sleep mode, the changing fan speed is not reported by different state-
ments in the display.
T ime r bu tto n
After switching on resp. as a standard setting, the appliance starts without a timer
setting, a 0 lights up on the display. By pressing the Timer button
fan operation time: 1 hour (1H), 2 hours (2H), 4 hours (4H) or 8 hours (8H). After
8 hours, the next press of the button deactivates the timer function, then it restarts
with the next press at 1H (1 hour). The set time is shown in the display. The remain-
ing operation time is counted down in the timer function, the appliance switches off
automatically after it has elapsed.
Notes:
Memory function
In standby mode, if the power plug is not disconnected, the set fan speed and oscil-
lation angle are saved. However, if the Timer function or the Sleep mode resp. the
Nature mode were activated, this is not saved.
LED light
If none of the buttons were pressed within the last minute, the LED light is dimmed
by 33%, meaning it decreases by 33%. Should another button be pushed, the LED
light returns to its original brightness.
in Sleep mode, the appliance works
in Sleep mode, the appliance
in Sleep mode, the appliance works like
, you can adjust
75