Herunterladen Inhalt Inhalt Diese Seite drucken

Velleman MONSCA3 Bedienungshandleitung Seite 3

15" tft farbmonitor - vga- & video-eingang
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

MONSCA3 – 15" TFT COLOUR MONITOR - VGA & VIDEO INPUT
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company
for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was
damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not
accept responsibility for any ensuing defects or problems.
• Risk of shock – do not open the back cover. There are no user-serviceable parts inside. Removing the back panel voids
the warranty.
• Have your monitor serviced by qualified service personnel only.
• Burn hazard! Do not place hands, face or objects close to the vent-holes of the monitor. The top of the monitor gets very
hot from the air that is exhausted through the vent-holes.
• Disconnect all cables before moving your monitor and prior maintenance activities. Damage, electric shocks or fire may
occur when moving the monitor with its cables attached. Clean the monitor using a slightly damp cloth. Avoid any liquid,
abrasive detergents and aerosols.
• Do not expose the monitor to rain and moisture.
• Keep your monitor away from excessive dust, high temperatures and direct sunlight.
• Use the monitor in a well-ventilated area and do not cover the vent-holes.
• Do not modify the monitor and avoid using unshielded cables.
• Disconnect the monitor from the mains when not in use.
• Turn off the monitor and disconnect from the mains when experiencing problems. Check all connections.
• Never place the monitor on an unstable cart, stand or table. Install the monitor on a flat and sturdy surface.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. Key Function
4. Connection
MONSCA3
MENU
Display OSD menu
-
Decrease value, diminish volume setting
VOLUME
Volume setting
+
Increase value, increase volume setting
SOURCE
Select input source
On/off
3
VELLEMAN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis