Rear Panel; Connect The Cables - Axis 262+ Installationsanleitung

Page 4
AXIS 262+ Overview
Front panel

Rear panel

RS-232
connector

Connect the cables

1. Connect the video recorder to the network using a shielded network cable.
2. Optionally connect external input/output devices, e.g. alarm devices. See page 9 for
information on the terminal connector pins.
3. Connect power, using supplied power adapter.
4. Check that the indicator LEDs indicate the correct conditions. See the table on page 11
for further details.
Disk indicator
Network indicator
9-pin I/O terminal
Network
connector
connector
AXIS 262+ Installation Guide
Serial number
Factory setup
button
Power indicator
Status indicator
Power button
Power
adapter
connector