Led Indicators - Axis 262+ Installationsanleitung

AXIS 262+ Installation Guide

LED indicators

LED Color
Power Green
Amber
Network Amber
Green
Unlit
Status Green
Amber
Red
Disk Green
Red
Note:
The indicator LEDs are tested during startup. The Status, Network and Disk LEDs show red for 1 second,
and the Power LED shows amber for 1 second
Indication
Normal operation.
Flashes green/amber during upgrade.
Flashes for activity on a 10 Mbps network.
Flashes for activity on a 100 Mbps network.
No connection.
Steady for normal operation.
Flashes during a reset to the factory default settings.
Flashes for failed reset to factory default, failed firmware upgrade, or failed data-
base repair.
Shows steady when the unit is overheated.
Flashes when the hard disk is accessed.
Shows steady for failed reset to factory default, failed firmware upgrade, failed
database repair, or for a hard disk error.
To save recorded video stored on the hard disk drive, download the video to your PC
and then restart the AXIS 262+ to return the hard disk to normal state.
Page 11