CAMPAGNOLO SUPER RECORD Bedienungsanleitung Seite 32

•
Using a screwdriver, gently lift the
spring H (Fig. 8) and remove the worn pad
from the pad holder (Fig. 8).
CAUTION
Do not force the spring during pad
replacement.
Insert the new pad until you hear a click
(Fig. 8) and check to make sure that the
spring has entered its seat.
• To facilitate insertion of the new brake
pad, wet the inside of the brake shoe
with alcohol. Never use lubriants (Fig. 9).
Check that the pad is properly secured by
trying to turn it in the opposite direction.
WARNING!
Alcohol is extremely flammable. Use
in a well ventilated area. Do not use
alcohol near any fire, flame, spark,
heat or other source of combustion.
• Make sure that the distance between
the brake pads and the rim is about 1
mm, as shown in figure 4 and adjust as
necessary.
32
H
8
9
ENGLISH