Herunterladen Inhalt Inhalt Diese Seite drucken

Nissei DSK-1031 Bedienungsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
2
ADJUST DATE AND TIME AND ACTIVATE THE CLOCK
Touch "SET" KEY and keep your finger on the
key until "20 11" starts flashing.
Clock is set in the order of year, month, day, hour
and minute.
The flashing number increases with MEMORY
KEY [1] and decreases with KEY [2]. The
number will be fast-forwarded if you keep your
finger on the key. Touching "SET" key will fix the
number and the next article will flash. Touching
"START/STOP" key will terminate the setting.
As the date and time are set, clock is activated.
Display of the clock while the device is turned off
indicates that the clock is activated.
M A K I N G A M E A S U R E M E N T
Insert AIR PLUG into AIR CONNECTOR
before
starting
a
blood
measurement.
The cuff is applicable to arm with circumference between 22 and 42 cm.
Take your arm size before measurement.
1
SIT ON A CHAIR AND APPLY CUFF.
Find a chair and a table so that you can be comfortably seated with your feet flat on the
Keep your finger
on the key.
1
confirm
increase
AIR CONNECTOR
pressure
OPERATION WITH AC ADAPTOR
AC CONNECTOR is located at the side of the
monitor.
Use the designated AC adaptor only.
It is suggested to take out the batteries when using the adapter. However, the clock is
inactivated as the AC adaptor is unplugged and therefore you may insert the batteries
to keep the clock activated. In such case, please make a few measurement without
plugging the adaptor to avoid battery leak.
Do not connect the AC adaptor to any power socket where accessibility is not
satisfying.
Protection: This device is double insulated and protected against short circuit and
overload by a primary thermal fuse.
2
Enclosures and Protective Covers: Equipment enclosed to protect against contact with
live parts, and with parts which can become live (finger, pin, hook test).
decrease
floor and your back and arm supported.
The cuff condition cannot be determined properly unless the cuff is applied at the
correct site in the correct direction.
Inaccurate readings may result if
cuff is wrapped over heavy
clothing or tight shirt that may
restrict circulation in your upper
arm or if sleeve is rolled up.
-8-
AC CONNECTOR

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis