Troubleshooting; Technical Specifications; Please Note - Laserworld el-200 led Bedienungsanleitung

Manual / Bedienungsanleitung: EL-200 LED

Troubleshooting

Problem
No function / fan not working
Effects don't change to the beat of the music Adjust sensitivity with the dial on the front.
Problems with DMX control
Device not working, but fan working

Technical specifications

•
Power supply: AC 85V-250V, 50/60 Hz
•
Ambient temperature: +10°C ... +35°C
•
Power consumption: 40 W
•
Operation modes: DMX 512, automatic, music mode
•
Lasersources: aircooled DPSS laser (green), diode laser (red)
•
Optical power (at the laser): max 200mW; >40mW 532nm green, >110mW 655nm red
•
LED: 5W RGB
•
Beam: ca. 3mm/1mrad
•
Laser class: 3b
•
Scanning system: gratings
•
Weight: 2.5 kg
•
Dimensions: 36x11x12 cm (W x D x H)

Please note

This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled
operation!
This manual is subject to changes without notification. Contact your local dealer for an update, or
check our website www.laserworld.com
For service contact your dealer or Laserworld.
Possible cause
Check mains connection
Check if device isn't in DMX or autom. mode
Check DMX address selection
Turn device off for ca. 1 Minute.
Page / Seite 6 of / von 12
Version / Stand: 11/2009