Assembly - capital sports DURATE 2.0 Bedienungsanleitung

EN
32

ASSEMBLY

Fix the front stabilizer (3) and Rear stabilizer (2) on the main frame (1) with eight sets
of flat washers (17), screws (18) tightly. Note: the front stabilizer is with transport
wheel.
Loosen the adjusting knob (10)
and pull it out first before sliding
the seat support post (4) into the
seat support post housing on the
main frame, and align holes for
your desired height ,then release
the adjusting knob and tighten it
properly. Then fix the seat (5).
1
2