Electrolux SC300 Benutzerinformation Seite 68

68 www.electrolux.com
Problem
The appliance is
noisy.
The buzzer sounds.
The Alarm icon
flashing.
Upper or lower
square is shown in
the temperature dis-
play.
The compressor
runs continuously.
Water flows on the
rear plate of the re-
frigerator.
Water flows inside
the refrigerator.
Water flows on the
ground.
The temperature in
the appliance is too
cold.
The temperature in
the appliance is too
warm.
Possible cause
The appliance is not sup-
ported properly.
The door is not closed
correctly.
An error has occurred in
measuring the tempera-
ture
The Temperature regulator
may be set incorrectly.
The door is not closed
correctly.
The door has been
opened too frequently.
The food temperature is
too high.
The room temperature is
too high.
During the automatic de-
frosting process, frost de-
frosts on the rear plate.
The water outlet is clog-
ged.
Food prevent that water
flows into the water collec-
tor.
The melting water outlet
does not flow in the evap-
orative tray above the
compressor.
The Temperature regulator
may be set incorrectly.
The Temperature regulator
may be set incorrectly.
The door is not closed
correctly.
Solution
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
Refer to "Door open alarm".
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible)
Set a warmer temperature.
Refer to "Closing the door".
Do not keep the door open
longer than necessary.
Let the food temperature
decrease to room tempera-
ture before storage.
Decrease the room temper-
ature.
This is correct.
Clean the water outlet.
Make sure that food do not
touch the rear plate.
Attach the melting water
outlet to the evaporative
tray.
Set a warmer temperature.
Set a lower temperature.
Refer to "Closing the door".