RIKA Look RLU Montageanleitung Seite 19

3. STEEL AND CAST CASE LEGS
Delivered Parts E15668 Steel leg
4x B17637 Steel leg
4x L02763 Insert plate
4x N111843 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
Delivered Parts E 15669 Cast iron leg
4x Z36216 Cast iron foot
4x L02763 Insert plate
4x N105049 Washer
4x N108656 Hexagonal nut
4x Z33581 Felt glider
Mounting
(exemplified by LOOK with steel leg)
Attach the steel leg and the insert plate with the nut and washer.
Tighten the nut firmly. Attach all 4 legs in this way with the insert
plates (positions as shown below), washers and nuts.
Loosen the screws which are holding the transport frame to the
pallet.
Note
Warning, the stove is no longer secured against tipping!
Tilt the stove, for example with a transport trolley. Now unscrew one
side of the transport frame.
Now tilt the stove on the free-standing feet and unscrew the second
part of transportation frame.
Set the stove carefully on all 4 feet.
#13
# 8
#10
# 8
|19
18