Plantronics ENCORE Benutzerhinweise Seite 10

Fig. 8 Polaris Headset Models
The Polaris headset models are fitted with a standard modular
connector.
To use the Polaris headset models, simply insert the modular
connector into the headset port of a compatible telephone.
Fig. 9 Clothing Clip
The clothing clip helps to keep the headset properly positioned
and free from the cord's weight. Attach the clothing clip at a
comfortable level.
Fig. 10 Quick Disconnect™ Connector
Some models are equipped with a Quick Disconnect connector.
When you separate the Quick Disconnect, you place an ongoing
conversation on 'hold' without removing the headset.
Before using your headset, join the Quick Disconnect to the
mating connector of your adaptor cable.
To put your call on 'hold' grasp the Quick Disconnect, as shown,
and pull straight apart.
To resume your conversation, reconnect the two halves.
Fig. 11 DECT&GSM Models
If you are using a DECT or GSM telephone, plug the 2.5mm
connector into the headset port of the telephone or adapter.
DIAGRAM KEY
GB
3 6