Start-Up; Changing The Battery; Operation; Setting The Unit - Silvercrest SKWD A1 Bedienungshinweise Und Sicherheitshinweise

Safety Instructions for Batteries / Start-up / Changing the battery / Operation
swallowed by children or pets. If accidentally
swallowed seek immediate medical attention.
EXPLOSION HAZARD! Never
recharge, short-circuit and / or open
batteries. The battery may overheat,
ignite or explode. Never throw batteries into
fire or water. The batteries may explode.
Avoid extreme environmental conditions and
temperatures, e.g. above radiators.as they may
affect batteries. Otherwise there is an increased
risk of leaking.
Promptly remove drained battery from the
product. Otherwise there is an increased risk of
leaking.
Check the battery regularly for leaks.
Leaking or damaged batteries may
result in burns upon contact with the
skin; always wear suitable safety
gloves!
If fluid is leaking from the battery, avoid con-
tact with the skin, eyes and mucous membranes.
In the event of contact with battery acid, thor-
oughly flush the affected area with clean water
and seek immediate medical attention.
Remove light dirt from the battery and product
contacts with a dry, lint-free cloth before
inserting the batteries.
Remove the battery if the product is not going
to be used for an extended period.
When inserting the battery ensure that it is in-
serted the right way round! This is shown in the
battery compartment. Otherwise the battery
can explode.
Insert the battery with care. Otherwise the
product can be damaged.
Please do not dispose of used batteries in your
household waste, but take them to a desig-
nated collection depot for special waste.
Start-up (Fig. A)
Open the battery compartment at the back of
the product by pressing the tab of the battery
cover toward the battery compartment and
lifting it upward.
24 GB
Remove the insulating strip. It is located between
the battery and the battery compartment.
5
Replace the battery cover. Be sure the two
extensions on the battery cover engage in the
opening for the battery cover. Press the battery
cover onto the battery compartment until you
hear and feel it lock into place.

Changing the battery

Open the battery compartment at the back of
the kitchen scales as described above.
1
Remove the drained battery.
Insert the new battery (1 x CR2032). Check the
polarity of the battery during insertion. The „+"
sign must point upward and the battery remain
inside the battery compartment.
Close the battery compartment as described
above.

Operation

Setting the unit

Place the kitchen scales
and flat surface.
Press the ON / OFF button / TARE button
switch on the kitchen scales
Select the weight unit by pressing the UNIT
button . You may select between „g", „oz",
4
„lb:oz", „ml", „fl.oz" (Fig. B).
Weighing (Fig. C)
Place the kitchen scales
and flat surface.
Press the ON / OFF button / TARE button
switch on the kitchen scales
will read „0".
Place the item you wish to weigh onto the
scales. The LC display
of the items.
on a solid, level,
1
to
3
.
1
on a solid, level,
1
to
3
. The LC display
1
will show the weight
2