Setting The Master Code - salvus Torino Bedienungsanleitung

2. Master and user code

2.1 Setting the master code

Make sure that the safe door is open when you change the code: enter successively *, a six digit code (factory
code 123456), ENTER.
Step
1. Press *
2. Press ENTER
3. Press 1
4. Press ENTER
5. Enter the master code (factory code 123456)
6. Press ENTER
7. Enter the new master code, e.g. 567891
8. Press ENTER
9. Repeat the new master code, e.g. 567891
10. Press ENTER
If the new code is not accepted, you will hear a triple beep and a red light flashes three times. In that case, start
again at step 1 for changing the master code. After changing the code, it is best to test the new code several
times with the door open.
18
Action Key
*
ENTER
1
ENTER
123456
ENTER
567891
ENTER
567891
ENTER
Signal