salvus Torino Bedienungsanleitung Seite 19

2.2 Setting the user code
Step
1. Press *
2. Press ENTER
3. Press 2
4. Press ENTER
5. Enter the master code, e.g. 567891
6. Press ENTER
7. Enter the new user code, e.g. 111111
8. Press ENTER
9. Repeat the new user code, e.g. 111111
10. Press ENTER
If the new code is not accepted, you will hear a triple beep and a red light flashes three times. In that case, start
again at step 1 for changing the user code. After changing the code, it is best to test the new code several times
with the door open.
Figure 2: lock
Rotary knob
(Torino 1,2)
Handle
(Torino 3,4,5,6)
Action
Close
Open
Key
*
ENTER
2
ENTER
567891
ENTER
111111
ENTER
111111
ENTER
Green en red light
Keyboard
Battery compartment
Pull
Signal
19