Silvercrest SSR 576 A1 Bedienungsanleitung Und Serviceinformationen Seite 17

Digital SD Sat Receiver SSR 576 A1
Copy
Copies the selected channel(s) to a different
place in the channel list. The target entry will be
overwritten.
Move
Moves the selected channel(s) to a different
place in the channel list. If you move the entry
upwards, it will be positioned before the target
entry. If you move it downwards it will be
inserted after the target entry. This feature is not
available for the clipboard.
Delete
Deletes the selected channel(s) from the
channel list. Any erased channels will be
labelled <unused> in the channel list. Therefore
the numbering of the remaining channels will not
vary.
Cut
Deletes the selected channel(s) from the
channel list. Any consecutive channels will move
up to the empty position.
Note: Only channels that are located before the
next <unused> position will move up. All
channels located after the <unused> entry will
not change.
Insert empty
Inserts an empty entry and labels it as
<unused>. All channels located after this entry
will move one position downwards. You can use
this function to reserve a channel list position for
a specific channel.
Note: Only channels that are located before the
next <unused> position will move down. All
channels located after the <unused> entry will
not change. Any entries labelled <unused> will
be overwritten. This feature is not available for
the clipboard.
Pack
This function can be selected only while a block
has been marked but the clipboard is not being
used. All channels that belong to the marked
block will be move upwards. Any entries labelled
<unused> will appear at the end of the block.
English - 15