Adjusting The Volume; Selecting Channels; Using The Numeric Buttons; Using The Channel List - Silvercrest SSR 576 A1 Bedienungsanleitung Und Serviceinformationen

Digital SD Sat Receiver SSR 576 A1

Adjusting the Volume

Press the - (29) or + (41) buttons to adjust the volume. To disable the sound immediately, press the
button (35). To restore the sound, press this button again or press the – (29) or + (41) buttons.
If you can't adjust the volume by using the – (29) or + (41) buttons, nor restore it by
pressing the
order to be able to control the volume from the satellite receiver, disable the
"volume bypass" (see page 24 – Volume bypass).

Selecting Channels

The increasing number of available channels unfortunately leads to ever greater confusion. Many
channels target specific regional audiences (e.g. foreign language), other channels are scrambled
and can only be viewed by paying a subscription and others may not lie within your field of interest.
To organise the numerous channels available in the Channel Lists there are different channel groups
and sorting criteria. Accessing channels can be done in different ways:

Using the Numeric Buttons

If you know the programme preset where the desired channel has been stored in the Channel List
you can recall this directly by entering it via the numeric buttons (32). After a few seconds, the
satellite receiver will show the desired channel. TIP: You can press the SWAP button (37) to toggle
between the current and the last-viewed channel.

Using the Channel List

You can show an overview of all stored channels by pressing the OK button (40) while no favourite
list has been activated. You can navigate this list via the P+ (28) or P- (30) buttons. Press the – (29)
or +(41) buttons to scroll faster through the list. Once you have found the desired channel, press the
OK (40) button to tune it in. An especially convenient way to access a specific channel is via favourite
lists. You can create up to nine favourite lists. Press the FAV [Yellow] button (44) to open the
favourite lists. Highlight the desired list and press the OK (40) button to confirm. The favourite list will
become active and will be opened in TV or radio mode when pressing the OK button (40). If you want
to display again all available channels, press the FAV [Yellow] button (44), select <none> and press
the OK button (40) to confirm. You will then be able to open the entire channel list when pressing the
OK button (40) in TV or radio mode.

Teletext

Many channels broadcast additional information and services. Teletext pages are like "electronic
magazines" allowing you to view news, sport, weather information, commercial offers and much
more. The availability and content depends on the channel provider. Its start or Index page is always
page number 100. On this page you will find an overview of the other pages. Press the TEXT button
(38) to launch the Teletext view. Pressing the TEXT button (38) multiple times lets you change the
Teletext window display mode. Press the SWAP button (37) to zoom the upper half of the Teletext
page. Press the SWAP button (37) a second time to enlarge the bottom half of the teletext page and
press it a third time to return to normal view. Enter the page numbers in 3-digit format via the numeric
keys (32). Press EXIT (39) to exit the Teletext pages.
English - 32
button (35) you have probably enabled the "volume bypass". In