Ayce KSE 40/2400 Originalbetriebsanleitung Seite 120

fig.23
unplug chain saw from power source before servicing, sever injury or death could
occur from electrical shock or body contact with moving chain.
cutting edges o chain are sharp, use protective gloves when handling chain.
cleaning saw body.
- Do not submerge saw in any liquids.
- Do not use products that contain ammonia, chlorine, or abrasives.
- Do not use chlorinated cleaning solvents, carbon tetrachloride, kerosene, or gasoline.
Keep saw body clean, use a soft cloth dampened with a mild soap ad water mixture, wipe
saw body to clean.
• Uneven bar wear causes most guide bar problems, incorrect sharpening of chain cutter
and depth gauge settings often cause this, when bar wears unevenly, it widens guide bar
groove, this causes chain clatter ad river popping. Saw will not cut straight, replaces
guide bar if this occurs.
• Inspect guide bar before sharpening chain. A worn or damaged guide bar is unsafe. A
worn or damaged guide bar will damage chain, it will also make cutting harder.
Bucking a log