Setting The Display Illumination; Cleaning - Silvercrest SRD 250 A1 Bedienungsanleitung

Cleaning

♦ Press repeatedly the SLEEP button
switch of time is shown in the display
♦ To switch off the sleep function press repeatedly the SLEEP button
until in the display

Setting the display illumination

♦ Set the DIMMER switch
the display
♦ Set the DIMMER switch
the display
Cleaning
DANGER
Risk of fatal electrocution!
► Remove the plug from the mains power socket before cleaning.
► Whilst cleaning make sure that no moisture is allowed to enter
the device.
► Do not use aggressive cleaning agents or scouring powder.
These can aff ect the surfaces of the device.
■ Clean the surfaces of the device with a soft, dry cloth.
SRD 250 A1
is shown. The SLEEP-LED
2
to HIGH if you want the indicators in
19
to appear brighter.
2
to LOW if you want the indicators in
19
to appear darker.
2
until the desired
14
.
2
,
14
goes out.
6
15
GB
IE