Programming The Wake Time And Method - Silvercrest SRD 250 A1 Bedienungsanleitung

Handling and operation

Programming the wake time and method

When programming the alarm times, you can select whether,
at the programmed time, alarm tones should sound or the radio
should start playing. Two diff erent alarm times (Alarm 1/Alarm 2)
can be programmed.
♦ Press and hold the AL1 button
the hour indicator blinks.
♦ Press or hold down the UP button
to set the hour.
♦ Press the AL1 button
the minute indicator blinks.
♦ Press or hold down the UP button
to set the minutes.
♦ Press the AL1 button
time is accepted and in the display
indicator.
♦ Press the UP button
Alarm tone or
♦ Press the AL1 button
setting.
NOTICE
► If you want to be awakened with the radio, apart from the wake
time programming you must also set, additionally, the desired
radio station and volume (see section Radio operation).
SRD 250 A1
or AL2 button
16
12
or AL2 button
16
12
or AL2 button
16
to set the desired wake method (
12
= Radio).
or AL2 button
16
. In the display
15
or DOWN button
again. In the display
15
or DOWN button
again. The set wake
15
appears the wake method
2
again to accept the
15
GB
IE
2
10
2
10
=
13