Getting Started - auna Streetstar Bedienungsanleitung

Getting Started

Battery charging
This device is equipped with a with a rechargeable battery. The batty will be charged automatically as
soon as the device is connected to power. After recharging, the device switches to trickle charging.
However, do not leave the device constantly connected to a socket. Turning off the device via remote
control switches it to standby mode, which consumes more power than switching it completely off at
the panel of the appliance.
ATTENTION: Before first use, fully charge the battery for at least 8 hours. Only after having
charged the battery for 3 times, the battery reaches its full capacity.
Charge the battery before and after each usage for a lasting battery performance.
First use / charging the battery
Before your first mobile use (without grid power), charge the battery of the device fully.
Connect the device to an ordinary wall socket via power adapter. The charging time is about 5.8 hours.
The state of charge is indicated by the LED on the back. The LED will got out when the batty is fully
charged.
Bluetooth
1. Set the search function of the Bluetooth unit from which you wish to play the music.
2. Press the MODE key until AUX is shown in the display. Activate the Bluetooth function of the media
player.
3. Select the Bluetooth device "AUNA" from the list of your device and make a connection.
If there is a password to be used, enter "0000".
19