Garantia 202040 Einbauanleitung Seite 12

GARANTIA drinking water intake module
GARANTIA drinking water in-
take module
Order No. 202040
 Read the installation and operating
instructions before use!
 Observe all safety information!
 Observe the operating instructions
 Retain the instructions for future use!
These instructions contain
information and warnings.
It is imperative to read the operating and
installation instructions before installa-
tion, connecting and commissioning.
You should also take into account the
operating and installation instructions
pertaining to the pump (suction line max.
12 m, suction lift max. 3 m) for the GAR-
ANTIA drinking water intake module.
Check the device for any transport dam-
age when it is delivered. Neither the
manufacturer nor the supplier assumes
liability for transport damage; the freight
carrier is held solely responsible for any
damage. You cannot claim for transport
damage once you have received and
commissioned the drinking water intake
module.
If the packaging is damaged, unpack the
drinking water intake module in the pres-
ence of the delivery person to find any
damage which the freight carrier should
be notified of in writing.
info@garantia.eu
www.garantia.eu
Installation instructions
Table of contents
1. IMPORTANT INFORMATION
1.1 Scope of delivery
1.2 Important
1.3 Area of application
1.4 Responsibility
important
2. ASSEMBLY AND INSTALLATION
2.1 Initial function check
2.2 Checking the on-site connections
2.3 Wall installation
2.4 Connecting the floating switch and the domestic
waterworks
2.5 Connecting the drinking water line / emergency
overflow
3. TECHNICAL DATA
3.1 System control
3.2 Float valve
3.3 3 way switch-over valve
Pressure and flow rate sensor „Brio"
3.4
3.5 Pump
10 / 27
11
11
11
11
11
12
12
12
13
14
15
16
17
17
17
17
17