Asus Pundit P1-AH1 Schnellinstallationsanleitung Seite 5

Removing the front panel cover
1. Lift the front panel cover hooks
outward.
2. Carefully remove the front
panel cover, then set it aside.
Removing the storage drive assembly
1. Lay the system on its side,
then locate and remove three
storage drive assembly screws.
Removing the CPU fan and heatsink
1. Disconnect the CPU fan cable.
2. Remove two screws securing
the blower to the CPU fan. Set
the blower aside.
2
1
2. Lift the storage drive assembly,
then set aside.
3. Unhook and slide out the
metal clips that secure the fan
and heatsink assembly to the
retention module.
4. Lift the CPU fan and heatsink
assembly, then set aside.
3
Quick installation guide Quick installation guide
2
4
5