Quick Installation - Conceptronic CFC Schnellinstallation

ENGLISH
Congratulations on the purchase of your
Conceptronic Compact Flash Card reader/writer.
The enclosed Hardware Installation Guide gives you a step by step explanation
of how to install the Conceptronic CFC on your Notebook. When problems
occur, we advise you to go to our support-site (go to
click 'support/2-Tech'). Here you will find a lot of possibilities to solve your
problems.
In order to provide the requested support we need the following details from
you:
•
A clear description of the problem;
•
Version number of the drivers you are using (always check the
Conceptronic website to see wether you are using the latest version);
•
Type of Notebook you are using;
•
Operating system you are using
For more information about Conceptronic products, please visit the
Conceptronic Web Site: www.conceptronic.net
The Software installation as described below, may be slightly different from the
installation on your computer. This depends on the Windows version you are
using.
Quick Installation Note
The Compact Flash PC-Card adapter does not need any drivers and can be
inserted into any Type II PC-Card slot of a notebook. After inserting
the Compact Flash PC-Card adapter into the PC-Card slot of your notebook you
can insert your Compact Flash Modem, Memory- or i.e. Network card into the
Compact Flash PC-Card adapter. Please follow the installation instructions from
the vendor of your CF-Card.
Conceptronic CFC

Quick installation

- 2 -
www.conceptronic.net and