Cola EASY CRONO Installations-, Bedienungs- Und Wartungsanleitung Seite 43

The panel enables stove lighting and shutdown, adjustment during operation and the setting of management and
maintenance programmes.
The display shows all the information on stove operation status.
To access the menus, proceed as follows:
- press the SET button 'P3';
- press the buttons 'P5' ,'P6' to scroll the various menus;
- press one of the increase/decrease buttons 'P1', 'P2', to set the required parameter;
- press the SET button 'P3' to confirm the parameter value.
On accessing the menu it is possible to obtain the various types of displays and carry out the available settings
depending on the access level.
Given below is the table of controls and respective messages displayed during programming or setting operation
parameters :
Button
The Figure opposite describes the meaning of the status indicators in the left
part of the display.
Activation of one of the segments on the display signals activation of the
corresponding device according to the list opposite.
Description
Mode
PROGRAMMING
Increase
temperature
WORK/OFF
PROGRAMMING
Decrease
temperature
WORK/OFF
Setting/menu
PROGRAMMING
WORK
ON/OFF
BLOCK
reset
PROGRAMMING
WORK/OFF
Decrease
power
PROGRAMMING
WORK/OFF
Increase
power
PROGRAMMING
Action
Modify/increase selected menu value
Increase room thermostat temperature value
Modify/decrease selected menu value
Decrease room thermostat temperature value
Access MENU
Access next submenu level
Set value and go to next menu item
Press for 2 seconds to switch the stove on or off (if off or on)
Resets the stove and returns it to off status
Goes to higher menu level. The modifications made are
memorised
Modifies stove heat output
Go to next menu item
Return to next submenu item. The modifications made are
memorised
Modifies exchanger speed
Go to previous menu item
Go to previous submenu item. The modifications made are
memorised
43
external contact
chrono
igniter
auger
fume extractor
exchanger
not used
alarm
EASY CRONO 2011