Switching On The Fridge; Temperature Regulation; Drinkschill Function; Childlock Function - Electrolux IK2550BNR Benutzerinformation

66 www.electrolux.com

3.6 Switching on the fridge

To switch on the fridge it is enough to
press the fridge temperature regulator. To
switch on the fridge in the other way:
1. Press Mode until the corresponding
icon appears.
The Fridge OFF indicator flashes.
2. Press OK to confirm.
The fridge OFF indicator goes off.

3.7 Temperature regulation

Set the temperature of the fridge and
freezer by pressing the temperature
regulators.
Default set temperature:
• +5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.

3.8 DrinksChill function

The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down a mixture for a
certain period of time, or when a reminder
is needed in order not to forget the bottles
placed in the freezer for fast cooling.
1. Press the Mode until the
corresponding icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press the OK to confirm.
The DrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an audible
alarm sounds that indicates that any
To select a different set
temperature refer to
"Temperature regulation".
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
drinks contained in the freezer
compartment should be removed and it is
necessary to press OK to switch off the
sound and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
It is possible to change the
time during the countdown
and at the end by pressing
the Temperature colder
button and the Temperature
warmer button.

3.9 ChildLock function

Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.

3.10 High temperature alarm

An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by
flashing the alarm icon and freezer
temperature indicators, and sounding of
buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds, then displays the set
temperature again.
The alarm indicator continues
to flash until the normal
conditions are restored.

3.11 Door open alarm

If the door remains open for a few
minutes, the Alarm light will flash and an
alarm will sound.
1. Press the Alarm button to switch off
the Alarm sound.
2. Close the door.
The Alarm light will switch off.