Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RD410 STEAM-CLEANER
FEATURES OF RD410
•
No more detergents or chemicals. Just add water.
•
Lightweight & Portable
•
Stainless Steel Boiler: Non-corroding, 18/10 stainless steel boiler. Welded
construction.
•
Heavy-duty crush-proofhose.
•
Versatile, quick-change accessories.
•
Indoor and Outdoor Use: Bathrooms, kitchens, living areas, pet areas and
appliances. Automotive, patio and windows.
OPERATING INSTRUCTIONS
Components
Power "On" Light (amber): This light will illuminate when the unit is plugged into
the 230V~ wall outlet and will remain on until the unit is unplugged.
CAUTION: Read the instructions for "Filling the Water Tank" before opening the
Safety Cap. Always depress hand grip steam trigger until all pressure/steam has been
vented from boiler. Always unplug before filling.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other
chemicals to the water used in this appliance. Use tap water or distilled/purified water
if the tap water in your area is very hard.
Filling Your RD410 with Water
1.
Before filling the RD410, make sure that the unit is NOT plugged in.
2.
Turn Safety/Filler Cap (3) counter clockwise until removed.
3.
Place Water Filling Funnel in tank and add 0.8 lt of water. Do not overfill. Replace
Safety/Filler Cap by turning clockwise. Heating time is approximately 3-5 minutes
with cold water. Filling boiler with hot water will shorten heat up time.
4.
Plug the unit into a standard 230 volt (3-prong) grounded wall receptacle. The
power light will illuminate.
5.
Allow approximately 3–5 minutes for vapor to reach its working temperature and
pressure.
6.
Connect desired attachments onto the Flexible Steam Hose.
7.
Upon initial use, some water will come out from the nozzle of the attachment.
This is unheated water in the hose and is normal.
CAUTION: Allow unit to cool for 5 minutes before refilling. When refilling the
machine while it is still hot, the first drops of water might bubble up. Use caution
when opening the Safety/Filler Cap as cap may become hot during use and escaping
steam can cause scalding.
IMPORTANT: When the RD410 has run out of water, steam output will cease.
CAUTION: Always drain condensate from hose before use or if unit has been left idle
for a period of time. To drain hose, direct nozzle into an appropriate container or sink
and depress hand grip steam trigger. Once hose has been drained, normal use may
be resumed. Never direct nozzle towards people, animals or plants.
6
INSTRUCTIONS
Werbung
Inhaltsverzeichnis
