Soba RD410 Gebrauchsanleitung Seite 10

RD410 STEAM-CLEANER INSTRUCTIONS
USAGE SUGGESTION FOR RD410
Wood, Vinyl and Marble Floors
Use the floor brush with a terry cloth attached. Move the brush across the floor as if
you are mopping. When the towel is soiled, you can turn the towel over or replace it
with a clean towel. If you are working on a very dirty area, you can move the brush
over the area slowly, several times. If it is a wood floor, move fast to avoid heat or
moisture buildup in the wood. By cleaning with the towel over the brush, you will not
affect the shine on the floor.
To Strip Wax
Use floor brush for open areas; detail brush for corners or tight areas - no towel,
slow strokes. Work a small area at a time - remove the emulsified wax from the floor.
When all of the wax has been stripped, immediately clean the floor and brushes with
water before residue has a chance to harden on them. Go back over the stripped area
with the floor brush with a towel to remove any remaining residue before waxing.
To Clean Waxed Floors
Wrap clean towel around the floor brush, brush quickly. This will cause the dirt to be
removed but not the wax.
Vinyl Floors
Do not allow heat to buildup in any kind of vinyl, since it can soften it enough to affect
its texture. Work fast on vinyl.
Tile Floors
Use the detail attachment with the detail brush attached to an extension. Have the
floor brush with cloth attached ready as well. Clean the grout between the tiles with
the detail brush. Remove the detail brush and attach the floor brush, move the brush
across the floor to clean the tile and remove excess moisture and residue. For areas
of tile that are very dirty, remove the towel and agitate with the brush. Do not let the
area dry before you wipe it up.
Spot Cleaning (Carpets)
Use the concentrator nozzle with or without the detail brush. Move slowly over the
soiled area, allowing the steam to penetrate. Agitate with detail brush or clean
towel. Dab the spot with the towel (do not rub). Repeat as necessary to remove
stain. Vacuum only after the carpet has completely dried. Always test color fastness
of carpet in an inconspicuous area before cleaning. If your RD410 fails to remove
stubborn stains a commercially available carpet shampoo may be required.
Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the
water used in this appliance as this may damage the unit or make it unsafe for use.
10