Herunterladen Diese Seite drucken

Velleman PCHDE1 Bedienungsanleitung Seite 4

Externes aluminiumgehäuse für 3.5” festplatte

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

4.
Features
connect an external 3.5" HDD up to 750GB to your pc
connection via USB2.0 port, USB1.1 compatible
OTB function (One Touch Backup): easy on key backup of files - software configurable
(function not supported on MAC)
PC & MAC compatible (available USB port required)
plug & play
storage and/or transfer of large files
portable data storage
hot swappable device
aluminum housing / cool system
blue light in front panel
HDD not included
5.
Content
Disk enclosure + stand
Screws to mount HD
USB cable (Type B to Type A connector)
CD-ROM containing OTB software (only English)
User manual
Power supply
Mains cable
6.
System requirements
PC compatible or MAC computer with available USB port
Operating system: Windows
®
For Windows
Mounting hard disk drive
7.
Unscrew the two screws located at the top and bottom of the enclosure, at the rear.
Remove the back cover.
Slide the mounting plate out of the casing.
Connect the IDE connector and power supply of the HDD to the mounting plate. Do not
force the connectors.
Screw the HDD on the mounting plate with four screws.
Gently slide the mounting plate with the HDD back into the enclosure.
Install the back cover and secure it with the two screws located at the top and bottom of
the enclosure, at the rear.
Do not attach external HDD to PC before necessary drivers have been installed.
Use
8.
• Before using the external device, install the necessary drivers on the PC.
• Face the back of the device.
• Connect the plug from the power adaptor to the DC PWR. connector (3). Make sure the switch
(4) is in the OFF position.
• Connect the power adaptor to the mains.
• Connect the type B USB connector of the USB cable to the USB port (1), and the type A
connector at the other side of the USB cable to the working PC.
00 (07/07/2008)
®
98/2000/ME/XP, Apple
98: driver required (included)
PCHDE1
®
Mac OS 8.6 or higher
Rear of device:
1. USB 2.0 type B connector
2. One Touch Backup (OTB) button
3. DC Power connector
4. On/Off switch
4

Werbung

loading