Personal Safety - easy Maxx JS-HH12A Gebrauchsanleitung

EN

3) Personal Safety

a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the infl uence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Wear personal protective equipment and always wear safety goggles. Wearing
protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Avoid accidental start-ups. Ensure the power tool is switched off before con-
necting it to the power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your fi nger on the switch or energising power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothing, jewellery or long
hair may become entangled in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) Power Tool Use and Care
a) Do not overload the device. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children. Do not allow persons unfa-
miliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of inexperienced people.
e) Handle the device with care. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power
tool's operation. Have damaged parts repaired before using the device. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions. Take account of the working conditions and the work to be per-
formed. Use of power tools for operations different from those intended could result
in a hazardous situation.
5) Service
a) Have the power tool repaired only by a qualifi ed expert using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
22