Autoadapt Carolift 40 Gebrauchsanweisung Seite 23

Unloading the wheelchair
1
Erect the hoist and make sure that the lift belt is
hooked to the wheelchair. Lift up the wheelchair, by
pressing the toggle switch, until it can pass freely over
the threshold.
2
Turn the hoist arm outwards and guide the wheel-
chair past the rear door opening to a suitable position
for lowering. Lower the wheelchair to the ground by
pressing the toggle switch. Unhook it.
Move the hoist inside and fold it to the floor according
to the instructions: "Erecting and folding the hoist".
23
Wheelchair lifts Carolift
EN