Würth POWER START POWER START WPS 12-700 Originalbetriebsanleitung Seite 15

Power Start
Art.
Nominal voltage
Internal battery
Fuse
Charging duration
Dimensions
Weight
Intended use
The device is for starting vehicles with a 12 V
on-board voltage, if the start-up capacity of the vehi-
cle batteries is insufficient. The device can also be
used to replace defective on-board 12 V batteries in
order to start up the engine!
The devices WPS 1224-700 (art. 0772 960) and
WPS 1224-900 (art. 0772 955 616) can also be
used on on-board voltages and on-board batteries
24 V.
Any other use is considered an improper use.
The user is solely responsible for damage
resulting from improper use.
Device elements
Overview [Fig. I]
1 Polypropylene housing
2 Fuse holder
3 Operating switch
4 Socket for 12 V DC
5 Alarm
6 Display
7 Charging state button
8 High-performance AGM battery
9 Battery terminals
10 Connection for charger
Technical Data
WPS 12-700 WPS 12-900
0772 950
12 V / DC
12 V, 16 Ah
300 A
354,8 × 120 × 395 mm
10,25 kg
WPS 1224-700
0772 955 617
12 V / DC 12 V / 24 V / DC
12 V, 23 Ah
up to 24 hours
10,60 kg
Symbol
WPS 1224-900
0772 960 0772 955 616
12 V / 24 V / DC
12 V, 16 Ah 2 x 12 V, 23 Ah
500 A
354,8 × 200 × 395 mm
17,10 kg
Symbols
Meaning
Read the operating instructions prior
to use.
Disposal
Dispose of lead-acid battery accord-
ing to regulations.
Explosion hazard
Highly flammable and extremely
flammable hazardous substances!
Risk of injury from battery acid.
Protection class III
17,80 kg
15