Herunterladen Diese Seite drucken

NATURAL CHLOR SMC20 Handbuch Zur Installation Und Wartung Seite 23

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 55
If your pool is used intensively outside the normal hours indicated
on the automatic filtering system, we recommend you operate the water filtering
and chlorinating system during these additional periods.
Note: For public pools (Hotels...) it would have to work the hours
necessary to maintain the chlorine level according to rules.
2) OPERATION OF THE WATER-FILTER
It is necessary to have proper circulation of water in order to
ensure the efficient distribution of chlorine. It is important to use the
corresponding skimmers and drain outlets to improve the water flow.
!
C
heck and adjust the Ph levels between 7.2 and 7.4 (fibreglass
pools, 6.8 – 7.0) and the chlorine levels to between 0.6 and 1.2 ppm two or three
times per week. Check the level of sand in the filter every two years and clean
the filter every fortnight.
Switch off the system whenever:
Water is not circulating.
The filter is being washed.
The pool is emptied.
THE WATER IS FROZEN.
You are cleaning the cell.
3) TECHNICAL SERVICE AND SPARE PARTS
Naturalchlor, S.L. or your local distributor have spares available for your
chlorinator. The use of unauthorized spare parts and the manipulation of the
apparatus by personnel not approved by "Natural Chlor" may lead to severe
damage to your chlorinator and it would cancel your warranty.
23

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

Smc30