DGM LTV-1914WHT Bedienungsanleitung Seite 10

4. Connections and Preparation
4.1 Connect Antenna or Video Facility
1. Use 75 coaxial cable plug or 300-75
antenna input terminal on the rear of the cabinet.
2. Connect the video facility to the audio, video in jack on the rear of the
cabinet.
4.2 Battery Installation of Remote-Control Unit
1. Turn the remote-control unit upside down. Scratch the grip of the battery
compartment
2. Install two new 1.5V AAA batteries, make sure the anode and cathode of
the batteries matches the "+", "–" marks inside the battery compartment. Or
not it would damage the unit.
3. Close the battery compartment cover.
impedance converter to plug in
9