Troubleshooting - switel TV-L2BT Bedienungsanleitung

release the 'Phone' button on the TV-L2BT and then you can converse with the
caller. The microphone in the headset will pick up your voice. To end the call
simply press and release the 'Phone' button again.
Changing the rubber ear buds
Two pairs of ear buds are delivered with the device.
One pair is already mounted on the headset.
1 For changing the ear buds pick the mounted ear buds at the end and tear
them off simply.
2 Position the spare ear buds onto the "open ends" and let them snap into place.

Troubleshooting

No sound
- Ensure that the receiver power ON/OFF switch is switched to ON.
- The charge level of the battery inside receiver may be too low. Recharge the
battery for approx. 3 hours.
- Ensure that the Bluetooth connection is established.
- The receiver output level is set too low. Adjust the volume to a suitable level.
Distortion
- The charge level of the battery inside the receiver may be too low. Recharge the
battery for approx. 3 hours.
- The receiver may be too far away from the Bluetooth transmitter (e.g.
smartphone etc.). Move closer to it.
22