Charging The Receiver Battery - switel TV-L2BT Bedienungsanleitung

Charging the receiver battery

Charge the battery for about 3 hours before first use.
1 Switch off the receiver (position OFF).
2 Place the headset receiver on the transmitter.
3 The green LED indicator on the headset receiver will
flash slowly when charging. It will glow in green steadily
in about 2 hours after the battery is fully charged.
4 If the receiver power is at ON position during charging,
after charging, slide the switch to OFF and ON again for
connection to use with transmitter.
5 The Headset Receiver can also be charged with the
supplied Power Adaptor through the Micro USB port on the Headset Receiver.
• A fully charged battery provides up to 6 hours of listening enjoyment.
• To conserve battery power, the receiver automatically shuts off if no
signal is detected for a period of approx. 5 minutes or when the level is
too low.
1